Molds for stackable storage crates and totes
Multi-cavity crate molds, hot runner, the mould itself in the album.
Molds for stackable storage crates and totes. The walls are thin but the corners are thick, so the corner areas are cooled harder than the walls to avoid sink; the handles and stacking ribs are formed by side actions that run on the ejector stroke.
| Cavity | 1 – 8, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.
Some images show sample parts produced with this mould, for reference only. This product is the injection mould itself.