Two-cavity mold for rectangular thin-wall boxes
2 cavities, hot runner with side gate block, polished cavity inserts.
A two-cavity mold for rectangular thin-wall boxes, shown as core side and cavity side. The side-gate block keeps the gate away from the box rim, and the cavity inserts are polished so the part releases without a draft mark on the visible face.
| Cavity | 2, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.