Hot-runner mold for thin-wall square food containers
4 cavities, valve-gate hot runner, hardened inserts, 4:3 catalog shot on white.
A four-cavity mold for square thin-wall food containers. The four cores sit in a single hardened block so the wall thickness stays even across cavities, and the hot runner is valve gated to keep the gate mark off the sealing rim. Ejection is by stripper plate, which suits the large flat bottom of this part.
| Cavity | 4, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.