Eight-cavity line for high-volume square containers
8 cavities in a two-block frame, hot runner, workshop photo from the mold shop.
Eight cavities in a two-block frame, built for customers who run one container size all year. Because the cavity blocks are separate, a worn cavity is replaced on its own instead of re-cutting the whole plate. The molds in the photo are the same frame size, lined up ready for trial.
| Cavity | 8, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.