Four-cavity mold for hinged bread and cake boxes
4 cavities, two-plate mold, hardened inserts, box lid and base in one shot.
A four-cavity mold for the hinged bread and cake boxes used in bakeries. Lid and base are moulded in one shot and joined by the hinge, so the mold has two different cavity sets in the same plate — the alignment between them is what decides whether the hinge closes cleanly.
| Cavity | 4, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.