Two-cavity mold for disposable plastic forks
2 cavities, hardened inserts, hot runner, matching knife mold in the album.
A two-cavity mold for disposable forks. The tines are the risk area: they are cooled first and ejected with a sleeve so they do not bend, and the inserts are hardened so the tine edges stay sharp over millions of shots.
| Cavity | 2, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.