Eight-cavity mold for thin-wall milk tea cup lids
8 cavities, hot runner, lids and cups in the photo, stripper ejection.
Eight cavities for the thin lids used on milk tea and cold drink cups. The lid is only a few tenths of a millimetre thick, so the cavity is vented at the rim and the core is cooled from the centre out; that combination is what keeps the lid flat enough to seal on the cup.
| Cavity | 8, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.