Two-cavity mold for multi-compartment lunch boxes
2 cavities, multi-grid cores, hot runner, packed lunch boxes in the album.
A two-cavity mold for multi-compartment lunch boxes, the kind used for takeaway meals. The dividing ribs are the hardest part to fill: each rib is fed from both sides so it does not short-shot, and the cores are split so a damaged rib is repairable without scrapping the core.
| Cavity | 2, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.
Some images show sample parts produced with this mould, for reference only. This product is the injection mould itself.