Six-cavity mold for round thin-wall bowls
6 cavities on a round pitch, hot runner, matched bowls shown in the album.
Six cavities arranged on a round pitch so the melt reaches every cavity at the same pressure. The bowl rim is the thinnest section, so the rim area gets its own cooling circuit; that is what keeps the rim from warping after ejection.
| Cavity | 6, stack moulds with higher cavitation on request |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.
Some images show sample parts produced with this mould, for reference only. This product is the injection mould itself.