Molds for container handles and carry grips
Long, thin cores with balanced cooling to avoid sink marks on the grip surface.
Handles are long, thin parts with a heavy section at each end — the classic recipe for sink marks. We balance the cooling circuit along the length of the core and gate at the heavy end so the shrinkage is fed while the part is still under pressure.
| Cavity | 1 – 72, customised to your injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.