Two-plate mold for one-piece hinged flip-top closures
Hinge geometry machined to survive millions of open-close cycles without stress whitening.
One-piece hinged caps are unforgiving: the living hinge has to fold millions of times, and the lid has to snap shut with the same force at the last shot as at the first. We machine the hinge insert in hardened steel and control the gate position so the melt front reaches the hinge at the right temperature and orientation.
| Cavity | 1 – 72, customised to your injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.