Home » Products » Injection Moulds » cap molds » Motor Cap Mold

Products

Motor Cap Mold

Motor Cap Mold

Precision end caps for small electric motors

Tight bore and bearing-seat tolerances, with low-warpage gating for flat mounting faces.

Categorycap molds

Motor end caps have to sit flat and hold a bearing bore within a few hundredths of a millimetre. Gating and cooling are arranged symmetrically so the mounting face stays flat, and the bearing seat is formed by a hardened insert that can be replaced independently.

  • Bearing seat formed by a replaceable hardened insert
  • Symmetric gating for a flat mounting face
  • Bore tolerance held to drawing

Mold specifications

Cavity1 – 72, customised to your injection press
Mold steelS136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20
Core & cavityVacuum hardened, single-cavity inserts for easy replacement
Cooling systemOptimised water circuit — faster cycles, lower moulding cost
RunnerHot runner system
Design softwareUG / AutoCAD
Surface treatmentFull-mould plating
Mold life≥ 3,000,000 shots under normal use

Project follow-up

During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.

Related Products