Caps closed inside the tool, no capping machine
The lid folds and snaps onto the body inside the mold, so parts leave the press already closed.
In-mold closing removes the need for a separate capping station: the tool folds the lid onto the body and presses it home before ejection. The result is a closed, tamper-evident part straight out of the press, with a consistent closing force that hand assembly never achieves.
| Cavity | 1 – 72, customised to your injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.