Precision mold for syringe barrels and plungers
Mirror-polished cavity inserts, tight concentricity control and a clean-room compatible design.
Medical barrels demand concentricity, a mirror finish on the barrel wall and no flash at the flange. Cavity inserts are vacuum hardened and polished, and the ejection system is designed to avoid the slightest mark on the inside wall where the plunger seal travels.
| Cavity | 1 – 72, customised to your injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.