Heavy-wall preform mold for 20 L water bottle preforms
8 cavities, conformal core cooling, large-gate hot runner.
Preforms for 20 L water bottles are thick-walled and slow to cool, so this mold uses conformal cooling around the core and a long ejector stroke. The eight cavities are fed by a hot runner with a large gate, which keeps the injection pressure inside a comfortable range for standard machines.
| Cavity | 8, customised to your preform and injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.