Two-block hot-runner mold with 48 self-locking cavities
48 cavities in two blocks, hot runner, hardened replaceable inserts.
A 48-cavity hot runner mold for PET bottle preforms. The cavity blocks are built as two independent halves, so a single worn cavity can be replaced without re-cutting the whole plate. The water circuit is balanced per block, which keeps preform wall thickness and acetaldehyde level even from the first cavity to the last.
| Cavity | 48, customised to your preform and injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.