96-cavity mold for very high volume preform production
96 cavities in three rows, stress-relieved frame, zoned cooling.
Our largest preform mold: 96 cavities in three rows, built for plants that run one preform around the clock. The frame is stress-relieved before finish machining and the guide pillars are lubricated from the outside, so the mold keeps its alignment over millions of shots. Cooling is split into zones so a single zone can be trimmed without touching the rest.
| Cavity | 96, customised to your preform and injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.