High-output 72-cavity block for 28 mm PET preforms
72 cavities, balanced hot-runner manifold, water-cooled gate area.
A 72-cavity block for bottlers running long campaigns on one preform. The hot runner manifold is balanced so each cavity fills at the same pressure, and the gate area is water-cooled to shorten the cycle without marking the gate scar. Core and cavity inserts are replaceable one by one.
| Cavity | 72, customised to your preform and injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.