Four-row 64-cavity layout for high-output bottle lines
64 cavities in four rows, separate cooling per row, 500–650 t presses.
The 64-cavity mold uses a four-row layout to keep the mold block compact while raising output per cycle. Every row has its own cooling circuit, so the temperature difference across the plate stays small and the preforms drop consistent from row to row. The plate is machined on a five-axis machining center and fits standard 500–650 t presses.
| Cavity | 64, customised to your preform and injection press |
|---|---|
| Mold steel | S136 / H13 / STAVAX / 1.2083 / 1.2344 / 4Cr13 / 2316 / SKD61 / P20 |
| Core & cavity | Vacuum hardened, single-cavity inserts for easy replacement |
| Cooling system | Optimised water circuit — faster cycles, lower moulding cost |
| Runner | Hot runner system |
| Design software | UG / AutoCAD |
| Surface treatment | Full-mould plating |
| Mold life | ≥ 3,000,000 shots under normal use |
During production we send regular progress reports and photos of the mold as agreed, so you can follow every stage from design approval to trial run and shipment.